Txv Sensor Bulb Location. Make Sure the TXV Remote Bulb Is Properly Placed 20210126 ACHR News The TXV measures and adjusts to maintain a specific superheat The ambient temperature will almost always be WAY higher than the suction line temperature, so we must ensure that the bulb is insulated.
TXV Bulb Mounting Position and External Equalization! from www.acservicetech.com
The TXV is a metering device that restricts the flow of refrigerant Sensing Bulb Location Q: What is the correct position for the TXV sensing bulb? The placement of the remote sensing bulb of the TXV onto the suction line is critical to proper TXV performance
TXV Bulb Mounting Position and External Equalization!
The TXV measures and adjusts to maintain a specific superheat In HVAC applications, the suction line will likely be in a location where it will be exposed to ambient temperature The important points to follow are: •Clean the suction line near the outlet of the evaporator •The entire length of the sensing bulb must be in
Tour of a TXV in Phoenix AZ on an evaporator coil by. the thermostatic expansion valve sensor bulb is clamped at the 5-o'clock position or 7-o'clock position on the lower portion of the suction line After the suction line is brazed and allowed to cool the bulb is to be mounted in the 10 or 2 O'clock position on a horizontal section of suction line within 6" of the evaporator cabinet then insulated to prevent it from sensing ambient temperature
TXV Bulb Mounting Position and External Equalization!. The right position of the sensing bulb matters TXV adjustment accuracy. So maybe it is the factory location? Just curious if a TXV that isn't causing starvation or flooding problems would have any impact on efficiency if it was installed incorrectly (e.g